- Home
- Equipment
Refine by
Biogest Ag Environmental Equipment & Supplies
18 equipment items found
Manufactured by:BIOGEST AG based inTaunusstein, GERMANY
BIOGEST non-return valves are bodyless flap valves according to DIN 19569-4 and are designed for preventing a backflow, in the event that the normal directional flow becomes ...
Manufactured by:BIOGEST AG based inTaunusstein, GERMANY
BIOGEST adapter technology is used to protect retention basins from flooding using an emergency overflow. It provides specific advantages for wall-mounting of flow regulators and enables an emergency draining function in addition to emergency relief with only one outflow opening. This enables the confluence of sewers outside the shaft to be avoided, which means that an additional cleaning shaft ...
Manufactured by:BIOGEST AG based inTaunusstein, GERMANY
BIOGEST AG realizes biological wastewater treatment plants in accordance to the SBR-process (“Sequencing-Batch-Reactor”) for the treatment of ...
Manufactured by:BIOGEST AG based inTaunusstein, GERMANY
Storm detention systems are required in order to prevent the hydraulic overloading of sewerage networks and the waste water treatment plants at the end of the line. The task of these systems is to provide a buffer for the considerable amount of rainwater produced in wet weather conditions and to regulate its onward flow in a controlled manner. Low control systems are required to protect items of ...
Manufactured by:BIOGEST AG based inTaunusstein, GERMANY
Storm tanks or sewers require cleaning after operation during storms due to the sediment deposited on the tank or sewer floor once the storm has subsided. If the system is not cleaned the potential for blockages is increased and malodours will occur due to septicity. The BIOGEST-flushing-system is an ideal solution to the ...
Manufactured by:BIOGEST AG based inTaunusstein, GERMANY
Waste water sewer and channels with little slope can causes sediments during dry weather operation. Storm water catchment channels create sediments during storm events due to the sediment deposited on the channels or sewer floor. This creates potential for blockages and malodours will occur due to ...
Manufactured by:BIOGEST AG based inTaunusstein, GERMANY
Flood protection measures requires devices developed to be particularly suited to this. The outflow from storm water detention basins must be constantly throttled to protect downstream villages. A suitable throttle unit should not only provide 'aquatic passability' (DIN 19700) i.e. for swimming fauna, but there should also be an escape flap ('terrestrial passability') for non-swimming animals. ...
Manufactured by:BIOGEST AG based inTaunusstein, GERMANY
PURITAINER – is a mobile wastewater treatment plant for the biological treatment of domestic sewage and is manufactured as a norm container including the complete technical equipment for the biological purification of wastewater. Ideal application: camps, settlements, hotels, restaurants, hospitals and sanitariums, barracks, campsites and holiday ...
Manufactured by:BIOGEST AG based inTaunusstein, GERMANY
Targeted retention of solids on relief thresholds in separating/ discharge structures of combined sewerage systems. Coarse solids can be discharged into the pre-clarifier in the form of suspended or floating matter during the relief process. In order to prevent this, relief structures were equipped with baffles which were given the task of retaining floating matter (e.g. oils and greases) and ...
Manufactured by:BIOGEST AG based inTaunusstein, GERMANY
In a rainstorm, it’s not just the water quantity which can lead to problems – coarse solids can also be difficult to deal with. Hygiene articles or other waste can result in unwanted pollution, which can even be environmentally damaging, at inflow locations to receiving waterways. Lamella baffles can provide ...
Manufactured by:BIOGEST AG based inTaunusstein, GERMANY
Floating scum baffle for solid retention of floating matters at stormwater overflows and CSO outlets. The vertical or radial floating baffles are suitable for strongly fluctuating water levels or high overflow levels as if moves with the water level up and down. The baffle will be produced in solid stainless ...
Manufactured by:BIOGEST AG based inTaunusstein, GERMANY
Throttle penstocks have the task of restricting the pass forward flow during storm conditions and are used to limit the flow from storm water retention tanks, sewers, retention tanks or overflow chambers to a preset value. The max. flow rate is obtained when having the maximum water ...
Manufactured by:BIOGEST AG based inTaunusstein, GERMANY
In a storm event the storage tank starts to fill as the network reaches full capacity. During storage solids settle in the base of the tank and in order to retain storage capacity and to eliminate the potential for odours the tank will need to be flushed. When the level in the storage system rises the Hydro-pneumatic sensor starts to get under the water level and the pressure in the hose to the ...
Manufactured by:BIOGEST AG based inTaunusstein, GERMANY
Waste water sewers and channels with little slope causes sediments during dry weather operation and during storm events. The BIOGEST- Channel Flushing Gate Type CF is an ideal solution to solve this problem. In dry weather situation the channel flushing gate is in high position. As soon as the gate is low position the water pressure from the dry weather water pushed the seal on the channel ...
Manufactured by:BIOGEST AG based inTaunusstein, GERMANY
High grade, robust, flat penstock made of 304 stainless steel, for Installation in front of the inlet or outlet of a shaft construction, according to German Institute for Standardization (DIN) 18202. The penstock of BIOGEST is sealed to all 4 sides, according to DIN 19569, part 4, constructed for closing / opening a wall inlet or outlet opening and is bolted directly to the wall. Penstock and ...
Manufactured by:BIOGEST AG based inTaunusstein, GERMANY
The SA can be used when it is desirable to completely close a chamber inlet/outlet at a pre-determined water level within the chamber. The SA can be used to limit the top water level as well as a non-return valve. The SA is a reliable non-powered alternative to an electrically actuated ...
Manufactured by:BIOGEST AG based inTaunusstein, GERMANY
The channel separator is designed to be used in separate sewage systems. Its principal purpose is to separate contaminated surface water, such as domestic sewage from illegal connections as well as oil, grit and debris from road surfaces, from the following cleaner, rain water. The contaminated surface water is passed on to the sewer for treatment at a downstream wastewater treatment facility ...
Manufactured by:BIOGEST AG based inTaunusstein, GERMANY
Selective retention and removal of debris and grit from channels. In channels where combined sewage and storm water are conveyed, there are also some coarse substances, such as grit and sewage related debris. These coarse substances usually move more slowly than the water flow and often cause problems with downstream plant and equipment. In principle the goal is to identify the sources of grit or ...